Plastic Transparent Fiber Braided PVC Hose Pipe

Product Detail

Plastic Transparent Fiber Braided PVC Hose Pipe



The application of Plastic Transparent Fiber Braided PVC Hose Pipe is very extensive, such as transporting drinking water, waste water, chemicals, cooling liquid, heating liquid, gas and particle, etc., but we must pay attention to several points when we use it. 

1. It is necessary to use the Plastic Transparent Fiber Braided PVC Hose Pipe in the recommended temperature and pressure range, which can not be higher than the rated pressure of the rubber hose. When pressure is applied, please open / shut the valve slowly. With the internal pressure expansion and contraction of the hose, please cut the hose into a longer length than you need.           

2. Please use more than four times the minimum bending radius of the Plastic Transparent Fiber Braided PVC Hose Pipe, less than the minimum bending radius, which will cause the rubber pipe to break and reduce the pressure resistance. When the powder and particles are used, it may be easy to wear out according to the conditions. Please enlarge the bending radius of the hose as much as possible.

3. the transport temperature can not exceed 45 degrees centigrade.           

4. if the installation is often collided, the pipe must take corresponding protection measures           

5. in installation, must be far away from the heat source, after the installation, need to be washed, the water speed can not be more than 2m/s.           

6. at the time of bonding, the bonding mouth should not be constructed below 5 C, and the bonding construction should strictly prohibit the smoke and fire.